The two upcoming smartphones are unlikely to stand out in the family photo: they are the exact copies of the Pixel 6 and Pixel 6 Pro.
After the successes of the Pixel 6 and Pixel 6 Pro, Google is expected the turn with its Pixel 7 and 7 Pro. Based on the first 3D renderings produced by OnLeaks , in terms of design, the American giant is not going to upset things: its next smartphones would look a lot like the current ones. The future generation would notably retain the horizontal bar at the rear in which the sensors are housed.
Two smartphones shaped from the same mold
Both smartphones are pictured with a selfie camera located at the top and center of the display. As with current models, the rear unit would house two sensors in the case of the Google Pixel 7, three in that of the Google Pixel 7 Pro.
The lower edge of the smartphone houses the two stereo speakers and the USB Type-C charging port, while the left edge has the slot for the SIM cards and the right the volume and power buttons .
The first renders and the video are for the Google Pixel 7 Pro, the sequel for the Pixel 7. You can find many more on the source sites.
A few millimeters of difference
Specifically, the Pixel 7 would have a 6.2 or 6.4-inch screen and dimensions of 155.6mm x 73.1mm x 8.7mm (11.4mm taking into account the thickness of the photo block ). For comparison, the Pixel 6 measures 158.8 x 74.8 x 8.9mm.
The Pixel 7 Pro would display slightly larger measurements, namely 163 x 76.6 x 8.7 mm, and an OLED screen of 6.7 or 6.8 inches. The Pixel 6 Pro has dimensions of 163.9 x 75.8 x 8.9mm.
The technical characteristics of smartphones are very uncertain at the moment. In principle, these versions will benefit from the second generation of Google Tensor SoCs .
There is no official release date for these Pixel 7s yet, but they will probably land in September 2022. Before that date, Google would launch its Pixel 6a , expected in May. In addition, be aware that the company is also working on a folding Google Pixel .
Maryam's Blog 